Home › News & insights

Built-In Wardrobe Design: Depth, Shelf Height, and Practical Zoning

A good built-in wardrobe isn't just attractive — it's sized to match what you actually own. Before you order one, learn these four numbers so no space goes to waste.

2 min read built-in wardrobebedroom designcloset storageinterior design

This article in other languages: فارسی · العربية

Open bedroom built-in wardrobe with organized shelving, hanging rail, and drawers, light wood and soft natural light
The right zoning is what makes a wardrobe practical — not just size.

Many built-in wardrobes that look cluttered and disorganized after a few months aren't short on space — they're divided wrong. Before you order a wardrobe, knowing four simple numbers — depth, shelf height, hanging-rail width, and drawer count — affects how usable it ends up being more than the color or door material you pick.

Depth: the number everyone underestimates

The standard interior depth for hanging clothes is about 60cm — the width of a hanger plus enough clearance for your hand to pass through. Less depth than that presses clothes against the door and makes it hard to close; more depth wastes the space behind the clothes, unless you dedicate that area to a drawer or basket. For linen and bag shelves, a shallower depth — about 40 to 45cm — is enough and actually better, since it avoids a dead zone at the back of the shelf you can't see.

Shelf height: for what, and where

  • The top zone, near the ceiling — suitcases and seasonal items; low accessibility is fine here.
  • The middle zone, at eye and hand level — everyday clothes, folders, and bags; it needs to be reachable without bending.
  • The bottom zone — shoes and heavy items; a drawer or short shelf works better than a deep shelf.
  • A long hanging rail for coats and overcoats needs at least 140cm of free vertical space; a short rail for shirts and folded trousers works with 90 to 100cm, opening up room below for a row of drawers or a shelf.
A good wardrobe should work for you six months from now just as much as it's designed for today.
Close-up of built-in wardrobe shelving and a drawer with a soft-close rail and warm wood grain
Soft-close drawers — a small detail with a big effect on daily use.

Drawer, open shelf, or rail — how to decide

The simple rule: anything that folds and doesn't need to be seen when stacked — t-shirts, towels, sheets — goes in a drawer or closed shelf; anything that wrinkles or needs to stay visible — jackets, dress shirts — goes on the hanging rail. The common mistake is giving the rail too much space, when in most homes the volume of folded clothes actually exceeds hanging items. A balanced split — roughly half rail, half drawer or shelf — works for most bedrooms; for the door mechanism itself, sliding versus hinged, we compare them in this article.

Read next

Half-open wooden folding door beside a laundry closet with panels folded to one side

Wooden Folding Accordion Doors: Where They Beat a Hinged Door

A folding wood door closes up like an accordion and opens almost the full width of an opening; for laundry closets, utility rooms, and tight wardrobes, it can be more practical than a hinged or sliding door.

wooden doorsfolding doorsbuilt-in wardrobelaundry room

Back to news